You are here

Home

This Compendium is a compilation of knowledge output of DSU, like patents, books, book chapters, journal publications and publications in conference proceedings, which are indexed by Scopus and/or Web of Science, UGC CARE List Group I, and Others.

DSU Research Compendium

Found 46 results
Filters: Keyword is Department of Mechanical Engineering  [Clear All Filters]
2021
Mishra, M. Kumar., and K. Jha, "Algorithms of Minimal Number of Sensors Placement Using Pressure Sensitivity Analysis for Leak Detection in Pipe Network", Water Management and Water Governance: Springer, pp. 393-412, 2021.
Keshavamurthy, R., V. Tambrallimath, and S. D. Bavan, "Development of Polymer Composites by Additive Manufacturing Process", Reference Module in Materials Science and Materials Engineering: Elsevier, 2021.
Revanna, T. G., and S. S. Katte, "Effects of Axial Conduction and Internal Radiation on Thermodynamic Optimization of a Tubular Space Radiator", Thermal Science and Engineering Progress, pp. 100834, 2021/01/15/.
Madhu, G., K. M. Mrityun Swamy, D. Ajay. Kumar, D. C. Prasad, and U. Harish, "Evaluation of hot corrosion behavior of HVOF thermally sprayed Cr3C2-35NiCr coating on SS 304 boiler tube steel", International Conference on Advanced Trends in Mechanical and Aerospace Engineering, ATMA 2019: American Institute of Physics Inc., 2021.
V. Kumar, D., K. M. Mrityun Swamy, M. Chinnapandian, and V. B. Hemadri, "Experimental determination on the performance and emission characteristics of delonix regia oil methyl ester and its blends on single cylinder diesel engine", 2nd International Conference on Materials, Manufacturing, and Machining for Industry 4.0.%D 2021: Elsevier Ltd, 2021.
Shetty, H., D. Sethuram, B. Rammohan, and P. R. Budarapu, "Low-velocity Impact Studies on GFRP and Hybrid Composite Structures", International Journal of Advances in Engineering Sciences and Applied Mathematics, vol. 12: Springer, pp. 125-141, 2021.
Murgayya, S. B., H. N. Suresh, N. Madhusudhan, and S. D. Bavan, "Reliability analysis of machine tool spindle-bearing system using XLrotor", Life Cycle Reliability and Safety Engineering, vol. 16, issue 7: Springer, pp. 991 - 998, 2020, 2021.
Hemadri, V. B., and K. M. Mrityun Swamy, "Stability, Performance and Emission Analysis of Single Cylinder Diesel Engine Fueled with Water Diesel Emulsion as an Alternate Fuel %A Anil, M D.", International Conference on Advanced Trends in Mechanical and Aerospace Engineering, ATMA 2019: American Institute of Physics Inc., 2021.
Hemadri, V. B., and P. M. V. Subbarao, "Thermal integration of reheated organic Rankine cycle (RH-ORC) with gas turbine exhaust for maximum power recovery", Thermal Science and Engineering Progress: Elsevier, 2021.
2020
Logendran, D., V. C. Sathish Gandhi, R. Kumaravelan, and S. Manoj, "Analysis of Elastic and Elasto-plastic Behaviour of A588 Structural Steel Beam", International Journal of Mechanics and Design, vol. 06, issue 2: JournalsPub, pp. 1 - 16, 2020.
Suresh, H. N., N. Madhusudhan, S. D. Bavan, and S. B. Murgayya, "Analysis of Jeffcott Rotor and Rotor with Disk using XLRotor", Strategic System Assurance and Business Analytics: Springer, pp. 543-556, 2020.
R. Chand, P., R. P. Yellampalli, and S. Mani V. Kanta, "Characterization of Banana and Bagasse Fiber-Reinforced Hybrid Epoxy Composites", 63rd Congress of the Indian Society of Theoretical and Applied Mechanics, ISTAM 2018: Springer, pp. 211 - 221, 2020.
Khalid, S. S., G. Vijaya, and M. S. Rajagopal, "Design and Modeling of Wye Piece", International Conference on Intelligent Manufacturing and Energy Sustainability, ICIMES 2019, vol. 169: Springer, pp. 461 - 471, 2020.
Singh, N. K., S. K. Kumar, S. K. Idury, K. K. Singh, and R. Jha, "Dynamic Compression Response of Porous Zirconium-Based Bulk Metallic Glass (Zr41Ti14Cu12.5Ni10Be22.5) Honeycomb: A Numerical Study", Structural Integrity of Additive Manufactured Materials and Parts: ASTM International, pp. 308-321, 2020/09/01.
D. Bavan, S., and S. Dattatri, "Finite Element Simulation Analysis on Blade and Stator Assembly Using Pin and Spacer for Turbines", 2018 International Conference on Advances in Materials and Manufacturing Applications, IConAMMA 2018, vol. 24: Elsevier Ltd, pp. 835 - 840, 2020.
Rao, P. C. R., R. V. Kumar, P. Chandra, M. Vedavyasa, and M. S. Rajagopal, "Influence of Machining Parameter on Tool Life While Machining Hybrid Metal Matrix Composites", Journal of Minerals and Materials Characterization and Engineering, vol. 8, issue 06: Scientific Research Publishing, pp. 440, 2020.
Jha, K., and M. Kumar. Mishra, "Object-oriented integrated algorithms for efficient water pipe network by modified Hardy Cross technique", Journal of Computational Design and Engineering, vol. 7, issue 1: Oxford University Press, pp. 56-64, 2020.
Murgayya, S. B., H. N. Suresh, N. Madhusudhan, and S. D. Bavan, "Optimization of high speed rotor-bearings system to assess the reliability using xlrotor", International Journal of Performability Engineering, vol. 16, issue 7: Totem Publishers Ltd, pp. 991 - 998, 2020.
Rahul, K., and S. Bhowmik, "Quantitative probing of static and dynamic mechanical properties of different bio-filler-reinforced epoxy composite under assorted constraints", Polymer Bulletin: Springer, 2020.
Yellampalli, R. P., O. Abhilash, and N. Kumar, "Reductions of Bending Stresses and Wear in an Aerodynamic Involute Spur Gear Profile", 63rd Congress of the Indian Society of Theoretical and Applied Mechanics, ISTAM 2018: Springer, pp. 319 - 327, 2020.
Idury, S. K., P. Rastogi, R. L. Narayan, N. K. Singh, K. R. Ravi, B. S. Murty, and J. Bhatt, "Room temperature dynamic indentation response of partially crystallized Zr–Cu metallic glass", Journal of Alloys and Compounds, vol. 834: Elsevier Ltd, 2020.
Kumar, B. Y. Santhos, A. M. Isloor, P. Kamalbabu, and G. C. Mohan Kumar, "Structure and rheology of chitosan-nanohydroxyapatite composite hydrogel for soft tissue regeneration", 2nd International Conference on Design, Materials and Manufacture 2019, ICDEM 2019, vol. 2247: American Institute of Physics Inc., 2020.
Suresh, H. N., N. Madhusudhan, S. D. Bavan, and S. B. Murgayya, "A Study on Reliability of Rotors Using XLrotor.", Advances in RAMS Engineering: Springer, pp. 199-216, 2020.
Rahul, K., G. Kumar, and S. Bhowmik, "Synthesis and Responsive Study of Tensile and Flexural Properties of Bamboo Filler Based Functionally Graded Composite", International Conference on Recent Innovations and Developments in Mechanical Engineering, IC-RIDME 2018: Springer, pp. 373 - 384, 2020.
Gandhi, V. C. Sathish, R. Kumaravelan, and S. Manoj, Thermal Engineering I: Sri Krishna Hitech Publishing, Chennai, 2020.
2019
R. Chand, P., R. P. Yellampalli, N. Kumar, . Veerachari, and A. N. Gowda, "Characterization of banana and bagasse fiber reinforced hybrid epoxy composites", 2nd International Conference on Polymer Composites, ICPC 2018, vol. 2057: American Institute of Physics Inc., 2019.
Goyal, R., L. P. Madhuri, K. S. Prasad, G. Hegde, and V. P. Shanmuganathan, "Fast responsive soft bio-mimetic robotic actuators", 2018 International Conference on BioMaterials, BioEngineering and BioTheranostics, BioMET 2018, vol. 15: Elsevier Ltd, pp. 300 - 308, 2019.
Gowda, K. B. M., M. S. Rajagopal, . Aswatha, and K. N. Seetharamu, "Heat transfer in a side heated trapezoidal cavity with openings", Engineering Science and Technology, an International Journal, vol. 22, issue 1: Elsevier, pp. 153 - 167, 2019.
Gowda, K. B. M., M. S. Rajagopal, and K. N. Seetharamu, "Numerical Studies on Natural Convection in a Trapezoidal Enclosure With Discrete Heating", Heat Transfer Engineering, vol. 41, issue 1: Taylor & Francis, pp. 595-606, 2020, 2019.
Murgayya, S. B., H. N. Suresh, N. Madhusudhan, and S. D. Bavan, "Reliability based maintenance model to assess the condition of rotor using XLrotor", International Journal of Performability Engineering, vol. 15, issue 8: Totem Publishers Ltd, pp. 2019 - 2030, 2019.
Tambrallimath, V., R. Keshavamurthy, S. D. Bavan, P. Gunderi, and H. M. Kumar, "Synthesis and characterization of graphene filled PC-ABS filament for FDM applications", 2nd International Conference on Polymer Composites, ICPC 2018, vol. 2057: American Institute of Physics Inc., 2019.
Kamalbabu, P., and G. C. Mohan Kumar, "TGA/DSC studies of marine coral reinforced polymer composites", 2nd International Conference on Polymer Composites, ICPC 2018, vol. 2057: American Institute of Physics Inc., 2019.
Tambrallimath, V., R. Keshavamurthy, S. D. Bavan, P. Koppad, and P. Gunderi, "Thermal behavior of PC-ABS based graphene filled polymer nanocomposite synthesized by FDM process", Composites Communications, vol. 15: Elsevier Ltd, pp. 129 - 134, 2019.
2018
Yellampalli, R. P., V. Swaroop, S. Ramesh, H. Adarsha, . Veerachari, and . Nischith, "Finite element analysis of mild steel - Rubber sandwich composite material", International Conference on Advances in Manufacturing, Materials and Energy Engineering, IConMMEE 2018, vol. 376, issue 1: Institute of Physics Publishing, 2018.
Archana, T., A. S. Kumar, R. R. Elangovan, Y. S. Rammohan, R. Dumpala, S. B. Ratna, and R. K. Kumar, "Fracture toughness and fatigue behavior of spider silk and S-glass epoxy composites: An FEM approach", Materials Today: Proceedings, vol. 5, issue 1: Elsevier Ltd, pp. 2627 - 2634, 2018.
Pavithra, H. S., and M. G. Anantha Prasad, "Study on Microstructure and Mechanical Properties of Al/SiO2/C hybrid metal matrix composite, with the Influence of Chills", 7th International Conference of Materials Processing and Characterization, ICMPC 2017, vol. 5, issue 2: Elsevier Ltd, pp. 6053 - 6058, 2018.
Tambrallimath, V., R. Keshavamurthy, and S. D. Bavan, "Thermal conductivity of copper filled polymer composites synthesized by FDM process", International Journal of Mechanical and Production Engineering Research and Development, vol. 8, issue Special Issue 8: Transstellar Journal Publications and Research Consultancy Private Limited (TJPRC), pp. 292 - 296, 2018.
2017
Kumar, B. K. Anil, M. G. Anantha Prasad, and K. Gopalakrishna, "Effect of Cryogenic Chill on Dendrite arm spacing, Ultimate tensile strength and Hardness of ASTM A 494 M Grade Nickel alloy Metal Matrix Composites", Materials Today: Proceedings, vol. 4, issue 10: Elsevier Ltd, pp. 10769 - 10778, 2017.
S. Kumar, A., R. Sundar, G. Sundara S. Raman, R. Gnanamoorthy, R. Kaul, K. Ranganathan, and K. S. Bindra, "Effects of laser peening on fretting wear behaviour of alloy 718 fretted against two different counterbody materials", Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 231, issue 10: SAGE Publications Ltd, pp. 1276 - 1288, 2017.
Kumar, B. K. Anil, M. G. Anantha Prasad, and K. Gopalakrishna, "Fractography of cryogenic chill casted ASTM A 494 M grade nickel alloy metal matrix composites", International Journal of Mechanical Engineering and Technology, vol. 8, issue 2: IAEME Publication, pp. 278 - 288, 2017.
S. Kumar, A., S. P. Kumar, G. Sundara S. Raman, and T. S. N. Sanka Narayanan, "Influence of SMAT Parameters on Microstructural and Mechanical Properties of Al-Mg-Si Alloy AA 6061", Journal of Materials Engineering and Performance, vol. 26, issue 4: Springer New York LLC, pp. 1947 - 1957, 2017.
Kumar, R. K., M. Kamaraj, S. Seetharamu, and A. S. Kumar, "A pragmatic approach and quantitative assessment of silt erosion characteristics of HVOF and HVAF processed WC-CoCr coatings and 16Cr5Ni steel for hydro turbine applications", Materials and Design, vol. 132: Elsevier Ltd, pp. 79 - 95, 2017.
2016
Kumar, B. K. Anil, M. G. Anantha Prasad, and K. Gopalakrishna, "Action of Cryogenic chill on Mechanical properties of Nickel alloy Metal Matrix Composites", International Conference on Advances in Materials and Manufacturing Applications, IConAMMA 2016, vol. 149, issue 1: Institute of Physics Publishing, 2016.
Kumar, B. K. Anil, M. G. Anantha Prasad, and K. Gopalakrishna, "Effect of cryogenic chill on mechanical properties of ASTM A 494 M grade nickel based alloy metal matrix composites", Materials Research, vol. 19, issue 6: Universidade Federal de Sao Carlos, pp. 1304 - 1309, 2016.
Shilpa, G. D., K. Sreelakshmi, and M. G. Anantha Prasad, "PZT thin film deposition techniques, properties and its application in ultrasonic MEMS sensors: A review", International Conference on Advances in Materials and Manufacturing Applications, IConAMMA 2016, vol. 149, issue 1: Institute of Physics Publishing, 2016.
Kumar, B. K. Anil, M. G. Anantha Prasad, and K. Gopalakrishna, "A review on mechanical and tribological behaviors of nickel matrix composites", Indian Journal of Science and Technology, vol. 9, issue 2: Indian Society for Education and Environment, 2016.